Configure Online or Call 1-800-711-1788  
Supermicro® X6QT8 Motherboard
Model #: X6QT8
Model X6QT8  
AvailabilityUsually Ships in
24-72 Hours
Price $1,649.99 
Subtotal
$1,649.99
Supermicro® X6QT8 Motherboard
Key Features:
  • Quad Dual-Core Intel® Xeon® Processor 7100/7000 Series Support, up to 3.40 GHz, 667/800 MHz FSB
  • Intel® E8501 Chipset
  • Up to 64GB Registered ECC DDR2 400 SDRAM
  • Dual Intel® 82571EB PCI-e Gigabit Ethernet Controllers
  • Adaptec AIC-7902 Dual Channel Ultra320 SCSI
  • 2x SATA Ports via ICH5R Controller SATA Controller
  • 1 x8 (in x16) PCI-Express, 1 x4 (in x8) PCI-Express, 3x 64-bit 133MHz PCI-X, 1x 64-bit 100MHz PCI-X
  • Zero Channel RAID Support
  • ATI ES1000 16MB Graphics
  • IPMI 2.0 Socket

    • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Proprietary ATX
    Dimensions
    • 16" x 14.3" (406.4mm x 363.2cm)
     
    Processor/Cache
    CPU
    • Quad 604-pin FC-mPGA4 Sockets
    • Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
      • Dual-Core Intel® Xeon® Processor 7100/7000 Series with 2MB L2 Integrated Advanced Transfer Cache
    System Bus
    • 667/800 MHz system bus
    Operating System Software
    • Supports 64-bit Operating Systems
    • Supports 32-bit Operating Systems
     
    System Memory
    Memory Capacity
    • Sixteen 240-pin DIMM sockets
    • Supports up to 64GB Registered ECC DDR2 400MHz memory
    • Dual channel memory bus
    • Memory must be populated in pairs and all be of same type
    Memory Type
    • DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 512 MB, 1GB, 2GB, 4GB
    Memory Voltage
    • 1.8V only
    Error Detection
    • Corrects single-bit errors
    • Detects double-bit errors (using ECC memory)
    • Supports Intel® x4 Single Device Data Correction (SDDC)
     
    On-Board Devices
    Chipset
    • Intel® E8501 chipset
    • MCH + ICH5R + 2 PXH + 82571
    SATA
    • ICH5R SATA Controller
    • RAID 0, 1, JBOD support
    SCSI
    • Adaptec AIC-7902 Controller
    • Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
    • Host RAID 0, 1, 10, JBOD support
    RAID
    • Support for Zero-Channel RAID
    • (Card NOT included)
    IPMI
    Network Controllers
    • Dual Intel® 8257EB Single Port PCI-e Gigabit Controllers
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    Graphics
    • ATI ES1000 SVGA PCI video controller with 16 MB of video memory
    Super I/O
    • National 87427 chip
     
    Input / Output
    Serial ATA
    • Two Serial ATA ports
    • Two SATA hard drives supported
    IDE
    • Dual EIDE channels support up to four UDMA IDE devices
    • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
    Floppy
    • 1 Floppy controller; 1.44 MB
    LAN
    • 2x RJ45 LAN ports
    USB
    • 2x USB rear ports
    • 2x USB internal headers
    • USB 2.0 Compliant / 1.1 Compliant
    VGA
    • 1x VGA Port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Port / Header
    • 1 Fast UART 16550 serial port
    • 1 Fast UART 16550 serial header
    Expansion Slots
    PCI-Express
    • 1 x8 (in x16) PCI-e slot
    • 1 x4 (in x8) PCI-e slot
    PCI-X
    • 3x 64-bit 133MHz PCI-X (3.3V) slots
    • 1x 64-bit 100MHz PCI-X (3.3V) slot
     
    System BIOS
    BIOS Type
    • 8Mb Flash EEPROM with AMI® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • APM 1.2
    • SMBIOS 2.3
    • DMI 2.3
    • PCI 2.2
    • ACPI 1.0
    • ACPI 1.0 (limited)
    • BIOS Rescue Hot Keys
    • USB Keyboard Support
    • Hardware BIOS Virus Protection
     
    Management
    Software
    • Optional IPMI (Intelligent Platform Management Interface) 2.0
    • Super Doctor III
    • Watch Dog
    • NMI
    Power Configurations
    • ACPI/APM Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • Power-on Mode for AC Power Recovery
    • Internal/External modem remote ring-on
     
    PC Health Monitoring
    CPU
    • Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
    • CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
    FAN
    • Total of nine 3-pin fan headers
    • 9x fans with status monitoring
    • Status monitor for speed control
    • Status monitor for on/off control
    • Supports 3-pin Fans
    • Low noise fan speed control
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU thermal trip support
    • Thermal Control for 6x Fan Connectors
    • I2C Temperature Sensing Logic
    • Thermal Monitor 2 support
    LED
    • CPU Overheat LED
    Other Features
    • Chassis intrusion detection
    • Chassis intrusion header
    • SDDC
    Environmental Spec.
    • Operating Temperature: 10°to 35°C (50°to 95°F)
    • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)
     
    Regulatory
    FCC
    • Passed to meet FCC standard requirement
    Price with selected options : 
    $1,649.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.