Supermicro® X7SB3-F Motherboard
Model #: 2605
Model 2605  
AvailabilityUsually Ships in
24-72 Hours
Price $309.99 
Subtotal
$309.99
Supermicro® X7SB3-F Motherboard
Key Features:
  • Intel® Xeon® 3000 Sequence and Core™ 2 Quad / Duo Series in LGA775 Package (FSB 1333/1066/800 MHz)
  • Intel® 3210 + ICH9 Chipset
  • Up to 8GB unbuffered ECC / non-ECC DDR2 800/677 SDRAM
  • Dual Intel® 82574L PCI-E Gigabit Controllers
  • LSI 1068E 8-Port SAS Controller; RAID 0, 1, 10
  • Built-in SATA ICH9 Controller 2x SATA (3 Gbps) Drive
  • 1 (x8) PCI-Express 1 32 bit PCI
  • On board Winbond® integrated Graphics
  • Integrated IPMI 2.0 with Dedicated LAN

  • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • ATX
    Dimensions
    • 12" x 9.6 ", (30.48cm x 24.38 cm)
     
    Processor/Cache
    CPU
    • Single LGA775 ZIF Socket
    • Supports Quad-Core Intel® Xeon® X3300/X3200 series
    • Supports Dual-Core Intel® Xeon® E3100/3000 series
    • Supports Intel® Xeon® processor L3360 and L3110 series
    • Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
    • Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
    • Supports Intel® Pentium® E5000/E2000 series
    • Supports Intel® Celeron® E1000 and 400 series
    • NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
    System Bus
    • 1333 / 1066 / 800 MHz system bus
     
    System Memory
    Memory Capacity
    • Four 240-pin DIMM sockets
    • Supports up to 8 GB of memory (Dual Channel)
    Memory Type
    • DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1 GB, 2GB
    Memory Voltage
    • 1.8V only
     
    On-Board Devices
    Chipset
    • Intel 3210 chipset
    • ICH9 +2x Intel® 82574L + LSI 1068E
    SAS
      • LSI SAS1068E
      • RAID 0, 1, 10 support
      • (Optional: AOC-IButton68) RAID 5 support
    Serial ATA
    • Intel® ICH9 SATA2 (3 Gbps) controller built-in
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    • Winbond® WPCM450
    Network Controllers
    • 2x Single-port Gigabit PCI-Express Ethernet Controllers
    • Intel® 82574L
    • Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
    • 1x Realtek RTL8201N PHY (dedicated IPMI)
    VGA
    • Matrox G200eW 8 MB DDR2
    Super I/O
    • Winbond 83627DHG chip
    Clock Generator
    • CK505
     
    Input / Output
    SAS
    • 8 SAS / SATA ports
    Serial ATA
    • Two Serial ATA ports (3 Gbps performance)
    • Two SATA hard drives supported
    Floppy
    • 1 Floppy controller; 1.44 MB
    LAN
    • 2x RJ45 LAN ports
    • 1x RJ45 Dedicated IPMI port
    USB
    • Up to 8x USB 2.0 / 1.1 compliant ports
    • 2 rear ports
    • 2 internal headers + 2 on-board
    VGA
    • 1x VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • 1x Fast UART 16550 serial port
    • 1x internal header
    Expansion Slots
    PCI-Express
    • 1 (x8) PCI-e slot
    PCI
    • 1 32 bit PCI slot
     
    System BIOS
    BIOS Type
    • 16Mb Flash EEPROM with Phoenix BIOS®
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3 support
    • PCI 2.2
    • ACPI 1.0/2.0
    • SMBIOS 2.3
    • USB Keyboard support
     
    Management
    Software
    • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
    • Super Doctor III
    • Watch Dog
    • NMI
    • W83627DHG(PECI support)
    Power Configurations
    • ACPI Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • Keyboard Wakeup from Soft-Off
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
    • Suspend to RAM(STR)
     
    PC Health Monitoring
    CPU
    • Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
    • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
    • Adjustable CPU clock frequency ratio (only available when CPU is supported)
    FAN
    • Total of five 4-pin fan headers
    • 5x fans with tachometer monitoring
    • Status monitor with firmware / software speed control
    • Status monitor for on/off control
    • Support 3-pin and 4-pin Fan speed control
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connector
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip support
    • Thermal Monitor (TM2) Support
    • PECI
    LED
    • CPU / System Overheat LED
    • +5 Standby alert LED
    Other Features
    • Chassis intrusion detection
    • Chassis intrusion header
     
    Operating Environment / Compliance
    RoHS
    RoHS 6/6
    Environmental Spec.
    • Operating Temperature: 10°to 35°C (50°to 95°F)
    • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)
    Price with selected options : 
    $309.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.