Supermicro® X7DWA-N Motherboard

Model #: X7DWA-N

Model

X7DWA-N

Availability

Usually Ships in
24-72 Hours

Price

$439.99

Subtotal

$439.99

Key Features:

Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1600 / 1333 / 1066 MHz FSB

Intel® 5400 (Seaburg) Chipset

Up to 64GB DDR2 800* / 667 / 533 SDRAM Fully Buffered DIMM (FB-DIMM)

Intel® 82575EB Dual-port Gigabit Ethernet Controller

6x SATA 3.0Gbps Ports via ESB2 Controller

2 (x16) PCI-Express 2.0, 2x 64-bit 133MHz PCI-X, 2x 32-bit (3.3V) PCI, 1x UIO slots (Support Supermicro UIO Cards)

HD 7.1 Channel Audio

Low Profile IPMI 2.0 (SIMLP) Slot

Dual IEEE 1394 Ports

Popular Components and Upgrades selected below will not add additional shipping.

Overview & Customize

Technical Specifications

Physical Stats

Form Factor	Extended ATX
Dimensions	13" x 12" (33.0cm x 31.0cm)


Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300LV sequence (Harpertown /Clovertown processor) up to 3.20 GHz Dual-Core Intel® Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus	1600 / 1333 / 1066 MHz system bus


System Memory

Memory Capacity	Eight 240-pin DIMM sockets Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Sparing supported
Memory Type	800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	512 MB, 1GB, 2GB, 4GB , 8GB**
Memory Voltage	1.8 V or 1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5400 (Seaburg) chipset ESB2
SATA	Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP-B) (Optional: AOC-SIMLP-3) with 3rd LAN support NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
Network Controllers	Intel® 82575EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking
Super I/O	Winbond 83627HG chip
Audio	ALC 883 High Definition 7.1 Channel Audio


Input / Output

Serial ATA	Six Serial ATA ports Six SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB
LAN	2x RJ45 LAN ports
USB	4x USB rear ports 1x USB internal header Total 5 USB 2.0 Compliant / 1.1 Compliant
Audio	High Definition 7.1 Channel Audio Line-in / Line-out / Microphone Ports
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Serial header
Parallel Port	1 ECP / EEP parallel port
Firewire	2x IEEE 1394 ports (headers)

Expansion Slots

PCI-Express	2 (x16) PCI-e (Gen 2.0) slots
PCI-X	2x 64-bit 133MHz PCI-X (3.3V) slots
PCI	2x 32-bit PCI (3.3V) slots
UIO	1x UIO Slot


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support


Management

Software	Optional IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Watch Dog NMI
Power Configurations	ACPI Power Management Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep model Power-on mode for AC power recovery Suspend to RAM ( STR )


PC Health Monitoring

CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of eight 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Support 3-pin fans (w/ speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PC temperature sensing logic PECI Thermal Monitor 2 (TM2) support
LED	CPU / System Overheat LED Suspend-state indicator LED
Other Features	Chassis intrusion detection Chassis intrusion header SDDC Support


Operating Environment / Compliance
RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Price with selected options :

$439.99

Site Terms of Use

Terms and Conditions of Sale

Return Policy

Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
All prices, specifications, availability, and terms of offers are subject to change without notice.
Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
Supermicro and other brand names, trademarks and logos are property of their respective owners.