Supermicro® X7DVL-L Motherboard
Model #: X7DVL-L
Model X7DVL-L  
AvailabilityUsually Ships in
24-72 Hours
Price $289.99 
Subtotal
$289.99
Supermicro® X7DVL-L Motherboard
Key Features:
  • Dual Intel® LV 64-bit Xeon® Quad-Core or Dual-Core, with 1066/1333 MHz FSB (90 Watt or Lower CPUs Only)
  • Intel® 5000V (Blackford VS) Chipset
  • Up to 16GB DDR2 667 & 533 SDRAM Fully Buffered DIMM (FB-DIMM)
  • Two Intel® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller
  • 4x SATA 3.0Gbps Ports via ESB2 Controller
  • 1 (x8) PCI-Express, 1x 32-bit 33MHz PCI
  • XGI Volari™ Z7 with 16MB video memory

  • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Proprietary
    Dimensions
    • 9.6" x 10" (24.4cm x 25.4cm)
     
    Processor/Cache
    CPU
    • Dual 771-pin LGA Sockets
    • Supports up to two Intel® 64-bit Xeon® processor(s) of the same
      type below:
      • Quad-Core Intel®
        Xeon®Processor
        5400/5300 sequence
        (Harpertown
        /Clovertown processor)

        up to 3.16 GHz
      • Dual-Core Intel®
        Xeon®Processor 5200/5100/5000
        sequence (Wolfdale
        /Woodcrest/Dempsey processor)
        up to 3.40 GHz
    System Bus
    • 1333 / 1066 / 667 MHz system bus
    Operating System Software
    • Supports 64-bit Operating Systems
    • Supports 32-bit Operating Systems
     
    System Memory
    Memory Capacity
    • Four 240-pin DIMM sockets
    • Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
    • Memory must be populated in pairs
    Memory Type
    • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1GB, 2GB, 4GB
    Memory Voltage
    • 1.8V only
    Error Detection
    • Corrects single-bit errors
    • Detects double-bit errors (using ECC memory)
    • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
     
    On-Board Devices
    Chipset
    • Intel® 5000V (Blackford VS) chipset
    • MCH + ESB2
    SATA
    • Intel ESB2 SATA 3.0Gbps Controller
    • RAID 0, 1, 5, 10 support (Windows Only)
    • RAID 0, 1, 10 support (Linux)
    Network Controllers
    • Two Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    Graphics
    • XGI Volari?Z7 16MB
    Clock Generator
    • ICS932S401EGLF
    Super I/O
    • Winbond 83627HG chip
     
    Expansion Slots
    PCI-Express
    • 1 (x8) PCI-e slot
    PCI
    • 1x 32-bit 33MHz PCI (5 V) slots
     
    Input / Output
    Serial ATA
    • Four Serial ATA ports
    • Four SATA hard drives supported
    IDE
    • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
    • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
    Floppy
    • 1 Floppy controller; 1.44 MB
    LAN
    • 2x RJ45 LAN ports
    USB
    • 2x USB rear ports
    • 1x USB internal headers for 2 ports
    • Total 4 USB 2.0 Compliant / 1.1 Compliant
    VGA
    • 1x VGA Port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Port / Header
    • 1 Fast UART 16550 serial port
    • 1 Fast UART 16550 serial header
    System BIOS
    BIOS Type
    • 8Mb Flash EEPROM with Phoenix® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • SMBIOS 2.3
    • DMI 2.3
    • PCI 2.2
    • ACPI 1.0
    • USB Keyboard support
    • Hardware BIOS Virus protection
     
    Management
    Software
    Power Configurations
    • ACPI Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • Power-on mode for AC power recovery
    • Internal / External modem remote ring-on
     
    PC Health Monitoring
    CPU
    • Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT
    • 4-Phase-switching voltage regulator
    FAN
    • Total of five 4-pin and 3-pin fan headers supporting up to 5 fans
    • 5x fans with tachometer status monitoring
    • Status monitor for speed control
    • Status monitor for on/off control
    • Support 3-pin fans (w/o speed control)
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU thermal trip support
    • Thermal Control for 5x fan connectors
    • PSU I2C temperature sensing logic
    • Thermal Monitor 2 (TM2) support
    LED
    • CPU / System Overheat LED
    • Suspend-state indicator LED
    • +5V Standby alert LED
    Other Features
    • Chassis intrusion detection
    • Chassis intrusion header
    • SDDC Support
     
    Operating Environment / Compliance
    RoHS
    RoHS 5/6
    Environmental Spec.
    • Operating Temperature: 10°to 35°C (50°to 95°F)
    • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)
    Price with selected options : 
    $289.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.