Configure Online or Call 1-800-711-1788  
Supermicro® X7DCX Motherboard
Model #: X7DCX
Model X7DCX  
AvailabilityUsually Ships in
24-72 Hours
Price $369.99 
Subtotal
$369.99
Supermicro® X7DCX Motherboard
Key Features:
  • Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1333 / 1066 MHz FSB
  • Intel® 5100 (San Clemente) Chipset
  • Up to 48GB 667/533MHZ DDR2 ECC Register SDRAM
  • Dual Intel® 82573V/L Gigabit Ethernet Controllers
  • 6x SATA2 (3 Gbps) Ports via ICH9R SB Controller
  • 5 (x8) PCI-e (1 in x16 slots),, 1 (x4) PCI-e (using x8 slot), 1x PCI 33MHz slots
  • XGI Z9s Graphics with 32 MB DDR2 memory
  • IPMI 2.0 (SIMSO) slot

    • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Extended ATX
    Dimensions
    • 12" x 13.05" (30.5cm x 33.2cm)
     
    Processor/Cache
    CPU
    • Dual 771-pin LGA Sockets
    • Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
      • Quad-Core Intel®
        Xeon®Processor
        5400/5300 sequence (Harpertown
        /Clovertown processor)
        up to 3.16 GHz
      • Dual-Core Intel®
        Xeon®Processor
        5200/5100 sequence (Wolfdale/Woodcrest processor)         up to 3.40 GHz
    System Bus
    • 1333 / 1066 MHz system bus
    Operating System Software
    • Supports 64-bit Operating Systems
    • Supports 32-bit Operating Systems
     
    System Memory
    Memory Capacity
    • Six 240-pin DIMM sockets
    • Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM
    • Dual channel memory bus
    • Memory must be populated in pairs
    Memory Type
    • 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 512MB, 1GB, 2GB, 4GB, 8GB**
    Memory Voltage
    • 1.8 V
    Error Detection
    • Corrects single-bit errors
    • Detects double-bit errors (using ECC memory)
     
    On-Board Devices
    Chipset
    • Intel® 5100 (San Clemente) chipset
    • Intel® ICH9R
    SATA
    • Intel ICH9R SB SATAII Controller
    • RAID 0, 1, 5, 10 support (Windows only)
    • RAID 0, 1, 10 support (Linux)
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0 / 1.5
    • 200-pin IPMI slot (SIMSO(+))
    • (Optional: AOC-SIMSO(+))
    • For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
    Network Controllers
    • Dual Intel® 82573V/L Single Port Gigabit Ethernet Controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    Graphics
    • XGI Z9s with 32 MB of DDR2 memory
    Super I/O
    • Winbond 83627DHG chip
    Clock Generator
    • ICS9LPR501 chip
     
    Input / Output
    Serial ATA
    • 6 Serial ATA ports
    • 6 SATA hard drives supported
    IDE
    • Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
    • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
    • Compact Flash (40-pin connector, IDE 1, single channel) slot
    Floppy
    • 1 Floppy controller; 1.44 MB
    LAN
    • 2x RJ45 LAN ports
    USB
    • 2 rear + 2 Type A connectors + 2 headers (4 Ports)
    • 8 total USB ports, 2.0 Compliantt
    VGA
    • 1x VGA Port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Port / Header
    • 1 Fast UART 16550 serial port
    • 1 header
    Expansion Slots
    PCI-Express
    • 5 (x8) PCI-e (1 in x16) slots
    • 1 (x4) PCI-e (using x8) slot
    PCI
    • 1x 32-bit 33MHz PCI (5V) slots
     
    System BIOS
    BIOS Type
    • 16Mb SPI Flash with Phoenix ® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3
    • PCI 2.2
    • ACPI 1.0/2.0/3.0
    • USB Keyboard support
    • Hardware BIOS Virus protection
    • SMBIOS 2.3
     
    Management
    Software
    Power Configurations
    • ACPI Power Management
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • CPU Fan auto-off in sleep mode
    • Power-on mode for AC power recovery
    • Internal/External modem remote ring-on
     
    PC Health Monitoring
    CPU
    • Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
    • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
    FAN
    • Eight 4-pin fan headers
    • 8x fans with tachometer monitoring
    • Status monitor for speed control
    • Status monitor for on/off control
    • Support for 3-pins (w speed control)
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU thermal trip support
    • Thermal Control for 8x Fan Connectors
    • PSU I2C temperature sensing logic
    LED
    • CPU / System Overheat LED
    • Suspend-state Indicator LED
    • +5V Standby alert LED
    Other Features
    • Chassis Intrusion Detection
    • Chassis Intrusion Header
     
    Operating Environment / Compliance
    RoHS
    RoHS 6/6
    Environmental Spec.
    • Operating Temperature: 10° to 35°C (50° to 95°F)
    • Non-operating Temperature: -40° to 70°C (-40° to 158°F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)
    Price with selected options : 
    $369.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.