Configure Online or Call 1-800-711-1788  
Supermicro® H8DMi-2 Motherboard
Model #: H8DMi-2
Model H8DMi-2  
AvailabilityUsually Ships in
24-72 Hours
Price $389.99 
Subtotal
$389.99
Supermicro® H8DMi-2 Motherboard
Key Features:
  • Two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series (Socket F) support; HT3.0 Link support ^
  • nVidia MCP55 Pro / AMD 8132 Chipsets
  • Up to 64GB DDR2 800/667/533 SDRAM
  • Dual-port Gigabit LAN/Ethernet Controller
  • 6 SATA2 3.0Gbps Ports
  • 2 x8 PCI-e, 1 x4 PCI-e (in x8 slot), 1 64-bit 133MHz PCI-X, 2 64-bit 133/100MHz PCI-X
  • ATI ES1000 Graphics
  • SIMLP IPMI 2.0 Support
  • 8 Fan Support with Speed Control

    • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Extended ATX
    Dimensions
    • 12" x 13.05" (30.5cm x 33.2cm)
     
    Processor/Chipset
    CPU
    • Dual 1207-pin Socket F
    • Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
    • HT3.0 Link support ^
    Chipset
    • nVidia MCP55 Pro
    • AMD 8132
     
    System Memory
    Memory Capacity
    • Eight 240-pin DIMM sockets
    • Supports up to 64 GB DDR2 800/667/533 MHz memory
    • For Single CPU: Memory must be populated in CPU1 DIMMs only
    • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
    • Dual channel memory bus
    Memory Type
    • DDR2 800/667/533 MHz ECC, reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
    Memory Voltage
    • 1.8V only
     
    On-Board Devices
    SATA
    • nVidia MCP55 Pro SATA2 3.0Gbps Controller
    • 6 SATA2 Ports
    • nVidia RAID 2.0
    • SATA RAID 0, 1, 0+1, 5 JBOD Support
    IPMI
    Network Controllers
    • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    VGA
    • ATI ES1000 Graphics Controller
      16MB Graphics & VGA port
    Super I/O
    • Winbond 83627HF
     
    Input / Output
    SATA
    • 6 SATA2 ports
    IDE
    • Single EIDE channel support up to two UDMA IDE devices
    • Supports UDMA Mode 5
    • Supports PIO Mode 4
    • Supports ATA 100/133
    Floppy
    • 1 Floppy port; 1.44 MB support
    LAN
    • 2 RJ45 LAN ports
    USB
    • Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
    • 2 Rear Ports
    • 4 Internal Headers
    VGA
    • 1 VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • 1 Fast UART 16550 serial port
    • 1 serial port header
    Parallel Port
    • 1 ECP / EPP parallel port
     
    Expansion Slots
    PCI-Express
    • 2 x8 PCI-e slots
    • 1 x4 PCI-e (in a x8 physical slot)
    • 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards w/ a power extension (i.e. CSE-RR2UE-AX)
    PCI-X
    • 1 64-bit 133MHz PCI-X (3.3V) slots
    • 2 64-bit 133/100MHz PCI-X (3.3V) slots
    IPMI
    • IPMI 2.0 expansion slot
    System BIOS
    BIOS Type
    • 8Mb Flash EEPROM with AMI® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3
    • PCI 2.2
    • ACPI 2.0
    • USB Keyboard Support
    • SMBIOS 2.3
     
    Management
    Software
    • Optional IPMI (Intelligent Platform Management Interface) 2.0
    • Super Doctor III
    • Watch Dog
    Power Configurations
    • ACPI Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) headert
    • Wake-On-LAN (WOL) header
    • Keyboard Wakeup from Soft-Off
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
     
    PC Health Monitoring
    CPU
    • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, 5V Standby, VBAT
    • CPU switching voltage regulator
    FAN
    • Up to 8-fan status tachometer monitoring
    • Up to six 3-pin & two 4-pin fan headers
    • Status monitor for speed control
    • 3-pin fan support
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip Support
    • I2C Temperature Sensing Logic
    LED
    • CPU / System Overheat LED
    • +5V Standby Alert LED
    Other Features
    • Chassis Intrusion Detection
    • Chassis Intrusion Header
    • Chipkill Support
     
    Operating Environment / Compliance
    RoHS
    RoHS 5/6
    Environmental Specifications
    • Operating Temperature:
         10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:
         -40°C to 70°C (-40°F to 158°F)
    • Operating Relative Humidity:
         8% to 90% (non-condensing)
    • Non-operating Relative Humidity:
         5% to 95% (non-condensing)
    Price with selected options : 
    $389.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.