Configure Online or Call 1-800-711-1788  
Supermicro® H8DME-2 Motherboard
Model #: H8DME-2
Model H8DME-2  
AvailabilityUsually Ships in
24-72 Hours
Price $359.99 
Subtotal
$359.99
Supermicro® H8DME-2 Motherboard
Key Features:
  • Two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series (Socket F) support; HT3.0 Link support ^
  • nVidia® MCP55 Pro Chipset, NEC uPD720400
  • Up to 128GB DDR2 800/667/533 SDRAM; 16 DIMM Sockets
  • Dual-port Gigabit LAN/Ethernet Controller
  • 6 SATA2 3.0Gb/s HDD Support
  • 2 x8 PCI-e, 2 64-bit 133/100MHz PCI-X, 2 64-bit 100MHz PCI-X
  • ATI ES1000 Graphics
  • 8 Fan Support with Speed Control

    • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Extended ATX
    Dimensions
    • 12" x 13.05" (30.5cm x 33.2cm)
     
    Processor/Chipset
    CPU
    • Dual 1207-pin Socket F
    • Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
    • HT3.0 Link support ^
     
    • Two Hyper-Transport links between the CPUs
    Chipset
    • nVidia MCP55 Pro
    • NEC uPD720400
     
    System Memory
    Memory Capacity
    • Sixteen 240-pin DIMM sockets
    • Support up to 128GB DDR2 800/667/533 MHz memory *
    • For Single CPU: Memory must be populated in CPU1 DIMMs only
    • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
    • Dual channel memory bus
    Memory Type
    • DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
    Memory Voltage
    • 1.8V only
     
    On-Board Devices
    SATA
    • nVidia MCP55 Pro SATA2 3.0Gbps Controller
    • 6 SATA Ports
    • nVidia RAID 2.0
    • SATA RAID 0, 1, 0+1, 5, JBOD Support
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • 200-pin IPMI slot
    • (Optional: AOC-SIM1U(+)  R 3.00) **
    • RMM (Remote Management Module)
    • (Card not included)
    Network Controllers
    • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    VGA
    • ATI ES1000 Graphics Controller
      16MB Graphics & VGA port
    Super I/O
    • Winbond 83627HF
     
    Input / Output
    SATA
    • 6 SATA2 ports
    IDE
    • Single EIDE channel support up to two UDMA IDE devices
    • Supports UDMA Mode 5
    • Supports PIO Mode 4
    • Supports ATA 100/133
    Floppy
    • 1 Floppy port; 1.44 MB support
    LAN
    • 2 RJ45 LAN ports
    USB
    • FUCI
    • Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
    • 2 Rear Ports
    • 4 Internal Headers
    VGA
    • 1 VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • 1 Fast UART 16550 serial port
    • 1 serial port header
     
    Expansion Slots
    PCI-Express
    • 2 x8 PCI-e slots
    • 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards w/ a power extension (i.e. CSE-RR2UE-AX)
    PCI-X
    • 2 64-bit 133/100MHz PCI-X (3.3V) slots
    • 2 64-bit 100MHz PCI-X (3.3V) slot
    IPMI
    • IPMI 2.0 expansion slot
    System BIOS
    BIOS Type
    • 8Mb Flash EEPROM with AMI® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3
    • PCI 2.2
    • ACPI 2.0
    • BIOS Rescue Hot Keys
    • USB Keyboard Support
    • Hardware BIOS Virus Protection
    • SMBIOS 2.3
     
    Management
    Software
    • Optional IPMI (Intelligent Platform Management Interface) 2.0
    • Super Doctor III
    • Watch Dog
    Power Configurations
    • ACPI Power Management
    • Wake-On-Ring (WOR) headert
    • Wake-On-LAN (WOL) header
    • Keyboard Wakeup from Soft-Off
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
     
    PC Health Monitoring
    CPU
    • Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
    • CPU switching voltage regulator
    FAN
    • Up to 8-fan status tachometer monitoring
    • Up to six 3-pin & two 4-pin fan headers
    • Status monitor for speed control
    • Stauts monitor for on/off control
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip Support
    • Thermal Control for 8x Fan Connectors
    • I2C Temperature Sensing Logic
    LED
    • CPU / System Overheat LED
    • Suspend-State Indicator LED
    • +5V Standby Alert LED
    Other Features
    • Chassis Intrusion Detection
    • Chassis Intrusion Header
     
    Operating Environment / Compliance
    RoHS
    RoHS 5/6
    Environmental Specifications
    • Operating Temperature:
         10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:
         -40°C to 70°C (-40°F to 158°F)
    • Operating Relative Humidity:
         8% to 90% (non-condensing)
    • Non-operating Relative Humidity:
         5% to 95% (non-condensing)
    Price with selected options : 
    $359.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.