Supermicro® X8DTT-IBXF Motherboard
Model #: X8DTT-IBXF
Model X8DTT-IBXF  
AvailabilityUsually Ships in
24-72 Hours
Price $849.99 
Subtotal
$849.99
Supermicro® X8DTT-IBXF Motherboard
Key Features:
  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Intel® 5520 (Tylersburg) Chipset
  • Up to 192GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • 1 (x16) PCI-E 2.0 slot
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Integrated Matrox G200eW Graphics
  • Mellanox ConnectX-2 DDR Infiniband 20Gbps Controller w/ QSFP connector

  • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Proprietary
    Dimensions
    • 16.64" x 6.5 " (42.26cm x 16.51cm)
     
    Processor/Cache
    CPU
    • Dual 1366-pin LGA Sockets
    • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
      • Intel®
        Xeon®Processor 5600 Series (Westmere)
      • Intel®
        Xeon®Processor 5500 Series (Nehalem-EP)
    QPI
    • up to 6.4 GT/s
     
    System Memory
    Memory Capacity
    • 12x 240-pin DIMM sockets
    • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
    • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
    • Memory Mirroring supported
    Memory Type
    • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 1GB, 2GB, 4GB , 8GB** , 16GB**
    Memory Voltage
    • 1.5 V
    Error Detection
    • Corrects single-bit errors
    • Detects double-bit errors (using ECC memory)
    • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
     
    On-Board Devices
    Infiniband
    • Mellanox ConnectX-2 DDR Infiniband 20Gbps Controller
    Chipset
    • Intel® 5520 (Tylersburg) chipset
    • ICH10R
    SATA
    • Intel ICH10R SATA 3.0Gbps Controller
    • RAID 0, 1, 5, 10 support (Windows)
    • RAID 0, 1, 10 support (Linux)
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    • Winbond® WPCM450 BMC
    Network Controllers
    • Intel® 82576 Dual-Port Gigabit Ethernet Controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
    • VMDq support for better performance of virtualization
    • 1x Realtek RTL8201N PHY (dedicated IPMI)
    Graphics
    • Matrox G200eW
    Super I/O
    • Winbond W83527HG chip
    Clock Generator
    • 932S421 chip
     
    Input / Output
    Serial ATA
    • Six Serial ATA ports
    • Six SATA hard drives supported
    LAN
    • 2x RJ45 LAN ports
    • 1x RJ45 Dedicated IPMI LAN port
    USB
    • 2 rear + 1 header (2 Ports)
    • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
    VGA
    • 1x VGA Port
    Serial Port
    • 1 Fast UART 16550 serial port
    Infiniband
    • 1 External QSFP Infiniband Connector
    Expansion Slots
    PCI-Express
    • 1 (x16) PCI-E 2.0 slot
     
    System BIOS
    BIOS Type
    • 32Mb SPI Flash EEPROM with AMI® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • PCI 2.2
    • ACPI up to 3.0
    • USB Keyboard support
     
    Management
    Software
    • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
    • Super Doctor III
    • Watch Dog
    • NMI
    Power Configurations
    • ACPI Power Management
    • Main Switch Override Mechansim
    • Power-on mode for AC power recovery
     
    PC Health Monitoring
    CPU
    • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
    • CPU Core 6-Phase-switching voltage regulator
    FAN
    • Total of four 4-pin PWM fans
    • 4x fans with tachometer monitoring
    • Status monitor for speed control
    • Status monitor for on/off control
    • Low noise fan speed control (4-pin fan only)
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU thermal trip support
    • Thermal Control for 4x Fan Connectors
    • PSU I2C temperature sensing logic
    • Thermal Monitor 2 (TM2) support
    • PECI
    LED
    • Power Fail / Overheat LED
    • Suspend-state Indicator LED
    • UID LED
    Other Features
    • SDDC Support
     
    Operating Environment / Compliance
    RoHS
    RoHS 6/6
    Environmental Spec.
    • Operating Temperature: 10° to 35° C (50° to 95°F)
    • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)
    Price with selected options : 
    $849.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.