Configure Online or Call 1-800-711-1788  
Supermicro® H8DI3+-F Motherboard
Model #: H8DI3+-F
Model H8DI3+-F  
AvailabilityUsually Ships in
24-72 Hours
Price $489.99 
Subtotal
$489.99
Supermicro® H8DI3+-F Motherboard
Key Features:
  • Two Six-Core / Quad-Core AMD Opteron™ 2000 Series (Socket F) support; HT3.0 Link support
  • AMD SR5690 + SP5100 Chipset
  • Up to 128GB Reg. ECC DDR2 800/667/533 SDRAM in 16 DIMM
  • Two Intel® 82574L controllers, Dual-Port Gigabit Ethernet
  • 6x SATA2 3.0Gbps Ports via AMD SP5100 controller, RAID 0, 1, 10
  • 2x PCI-e 2.0 x16 (x8 signals), 1x PCI-e 2.0 x8 (x4 signals), 1x PCI-e 2.0 x8, 2x PCI-X 133/100
  • LSI 1068E 8 port SAS controller, RAID 0, 1, 10; RAID 5 Optional
  • IPMI 2.0 with dedicated LAN Support
  • 8x Fans with Speed Control

    • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Extended ATX
    Dimensions
    • 12" x 13.05" (30.5cm x 33.2cm)
     
    Processor/Chipset
    CPU
    • Dual 1207-pin Socket F
    • Supports up to two Six-Core / Quad-Core AMD Opteron™ 2000 Series processors**
    • HT3.0 Link support
    Chipset
    • AMD chipset SR5690 + SP5100
     
    System Memory
    Memory Capacity
    • Sixteen 240-pin DIMM sockets
    • Support up to 128GB DDR2 800/667/533 MHz memory *
    • Dual channel memory bus
    • Single or Dual (recommended) channel memory support
    • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
    Memory Type
    • DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
    Memory Voltage
    • 1.8V only
     
    On-Board Devices
    SATA
    • AMD SP5100 (RAID 0, 1, 10)
    SAS
    • LSI 1068E 8 port SAS controller
    • RAID 0, 1, 10; RAID 5 Optional
    • IButton68 (Optional: AOC-IButton68)
        RAID 5 support
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM over LAN support
    • Winbond® WPCM450 BMC
    Network Controllers
    • Two Gigabit Ethernet Intel® 82574L controller, Dual-Port
    • 10/100/1000BASE-T support
    VGA
    • Matrox G200ew 16MB DDR2
    Super I/O
    • Winbond® 83627DHG chip
     
    Input / Output
    SATA
    • 6x SATA2.0 (3Gb/s) Ports
    SAS
    • Integrated LSI 1068E SAS Controller ^
    • Eight Serial Attached SCSI (SAS) ports
    • Each SAS port supports up to 4 SAS / SATA drives
    IDE
    • Single EIDE channel support up to two UDMA IDE devices
    • Supports UDMA Mode 5
    • Supports PIO Mode 4
    • Supports ATA 100/133
    LAN
    • 2 RJ45 LAN ports
    Floppy
    • 1 Floppy port, 1.44 MB
    USB
    • 6x USB 2.0 ports
    • 2x Rear / 2x header / 2x type A
    VGA
    • 1x VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • 1x Fast UART 16550 serial port
    • 1x serial port header
     
    Expansion Slots
    PCI-Express
    • 2x PCI-e 2.0 x16 (x8 signals) slots
    • 1x PCI-e 2.0 x8 slot
    • 1x PCI-e 2.0 x8 (x4 signals) slot
    PCI-X
    • 2x PCI-X 64-bit 133/100MHz slots
    System BIOS
    BIOS Type
    • 16Mb SPI Flash ROM with AMI® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3
    • PCI 2.2
    • ACPI 2.0
    • USB Keyboard Support
    • SMBIOS 2.3
     
    Management
    Software
    • IPMI (Intelligent Platform Management Interface) 2.0
    • Super Doctor III
    • Watch Dog
    Power Configurations
    • ACPI Power Management
    • Wake-On-LAN (WOL) header
    • Keyboard Wakeup from Soft-Off
    • Power-on mode control for AC power loss recovery
     
    PC Health Monitoring
    CPU
    • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
    • CPU switching voltage regulator
    FAN
    • Up to 8-fan status tachometer monitoring
    • Up to eight 4-pin fan headers
    • Status monitor for speed control
    • 3-pin fan support (w/o speed control)
    • Low noise fan speed control
       (4-pin fan only)
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip Support
    • I2C Temperature Sensing Logic
    LED
    • CPU / System Overheat LED
    • +5V Standby Alert LED
    Other Features
    • Chassis Intrusion Detection
    • Chassis Intrusion Header
     
    Operating Environment / Compliance
    RoHS
    RoHS 5/6
    Environmental Specifications
    • Operating Temperature:
         10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:
         -40°C to 70°C (-40°F to 158°F)
    • Operating Relative Humidity:
         8% to 90% (non-condensing)
    • Non-operating Relative Humidity:
         5% to 95% (non-condensing)
    Price with selected options : 
    $489.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.