Configure Online or Call 1-800-711-1788  
Supermicro® H8DMR-i2 Motherboard
Model #: H8DMR-i2
Model H8DMR-i2  
AvailabilityUsually Ships in
24-72 Hours
Price $349.99 
Subtotal
$349.99
Supermicro® H8DMR-i2 Motherboard
Key Features:
  • Two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series (Socket F) support; HT3.0 Link support ^
  • nVidia® MCP55 Pro Chipset, NEC uPD720400
  • Up to 64GB DDR2 800/667/533 SDRAM
  • MCP55 Pro Chipset Dual-Port Gigabit LAN / Ethernet Controller
  • 6 SATA2 3.0Gbps Ports
  • Left Universal Slot: 1 64-bit PCI-X 133MHz OR (x8) PCI-E
  • Right Universal Slot: 1 64-bit PCI-X 100MHz OR (x8) PCI-E
  • ATI ES1000 16MB Graphics
  • 5 Fan support with Speed Control
  • SIM1U IPMI 2.0 Support

    • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • Extended ATX
    Dimensions
    • 12" x 13.05" (30.5cm x 33.2cm)
     
    Processor/Chipset
    CPU
    • Dual 1207-pin Socket F
    • Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
    • HT3.0 Link support ^
     
    • Two Hyper-Transport links between the CPUs
    Chipset
    • nVidia MCP55 Pro
    • NEC uPD720400
     
    System Memory
    Memory Capacity
    • 8x 240-pin DIMM sockets support up to
        64GB DDR2 800/667/533/400 MHz SDRAM
    • Single or Dual (recommended) channel memory support
    • For Single CPU: Memory must be populated in CPU1 DIMMs only
    • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
    Memory Type
    • DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
    Memory Voltage
    • 1.8V only
    Error Detection
    • Corrects single-bit errors
    • Detects double-bit errors (using ECC memory)
     
    On-Board Devices
    SATA
    • nVidia MCP55 Pro SATA2 3.0Gbps Controller
    • 6 SATA Ports
    • nVidia RAID 2.0
    • SATA RAID 0, 1, 0+1, 5, JBOD Support
    IPMI
    Network Controllers
    • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
    • Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
    Super I/O
    • Winbond 83627HF
    VGA
    • ATI ES1000 Graphics Controller
      16MB Graphics & VGA port
     
    Input / Output
    Serial ATA
    • Six SATA2 Ports
    • Six SATA2 hard drives supported
    IDE
    • Single EIDE channel support up to two UDMA IDE devices
    • Supports UDMA Mode 5
    • Supports PIO Mode 4
    • Supports ATA 100/133
    Floppy
    • 1 Floppy port, 1.44 MB
    LAN
    • 2 RJ45 LAN ports
    USB
    • FUCI
    • Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
    • Two Rear Ports
    • Two Internal Headers
    VGA
    • One VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • One Fast UART 16550 serial port
    • One header
    Expansion Slots
    Universal PCI-e / PCI-X
    • Two Universal PCI-e / PCI-X Slots
    Slot 1
    • One PCI-express x8 Slot OR
    • One 64-bit 133MHz PCI-X slot
    Slot 1
    • One PCI-express x8 Slot OR
    • One 64-bit 100MHz PCI-X slot
     
    System BIOS
    BIOS Type
    • 8Mb Flash EEPROM with AMI® BIOS
    • SST49LF080A BIOS Chip
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3
    • PCI 2.2
    • ACPI 2.0
    • USB Keyboard Support
     
    Management
    Software
    Power Configurations
    • ACPI Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) headert
    • Wake-On-LAN (WOL) header
    • Keyboard Wakeup from Soft-Off
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
     
    PC Health Monitoring
    CPU
    • Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT, Chipset
    • CPU switching voltage regulator
    FAN
    • Up to 5-fan status tachometer monitoring
    • Up to five 3-pin fan headers
    • Status monitor for speed control
    • Stauts monitor for on/off control
    • Support 3-pin fans w/ fan-speed control
    • Low noise fan speed control
    • Overheat backup fan connector
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip Support
    • I2C Temperature Sensing Logic
    LED
    • CPU / System Overheat LED
    • Suspend-State Indicator LED
    • +5V Standby Alert LED
    Other Features
    • Chassis Intrusion Header
    • Chassis Intrusion Detection
     
    Operating Environment / Compliance
    RoHS
    RoHS 5/6
    Environmental Spec.
    • Operating Temperature:
         10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:
         -40°C to 70°C (-40°F to 158°F)
    • Operating Relative Humidity:
         8% to 90% (non-condensing)
    • Non-operating Relative Humidity:
         5% to 95% (non-condensing)
    Price with selected options : 
    $349.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.