Configure Online or Call 1-800-711-1788  
Supermicro® H8SMi-2 Motherboard
Model #: H8SMi-2
Model H8SMi-2  
AvailabilityUsually Ships in
24-72 Hours
Price $269.99 
Subtotal
$269.99
Supermicro® H8SMi-2 Motherboard
Key Features:
  • Single AMD® Opteron™ 1000 Series (Socket AM2/AM3) Support, 1000 MHz HyperTransport Link
  • nVidia MCP55 Pro Chipset
  • Up to 8GB DDR2 800/667/533 SDRAM
  • Dual-port Gigabit LAN/Ethernet Controller
  • Up to 6 SATA2 3.0 Gb/s HDD Support
  • 1 (x16) PCI-Express 1 (x8) PCI-Express (using x16 slot), 1 (x4) PCI-Express (using x8 slot), 3 32-bit 33MHz PCI slots
  • ATI ES1000 Graphics & VGA port
  • SIMLP / SIM1U IPMI 2.0 Support

    • Popular Components and Upgrades selected below will not add additional shipping.
    Physical Stats
    Form Factor
    • ATX
    Dimensions
    • 12" x 9.6 " (30.5cm x 24.4cm)
    • 6 layers
     
    Processor/Chipset
    CPU
    • Single 940-pin AM2 Socket
    • Supports one Quad-Core AMD Opteron™ 1000 Series
      (Socket AM2/AM3) processor
      NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor
    System Bus
    • 1000MHz HyperTransport
    Chipset
    • nVidia MCP55 Pro
     
    System Memory
    Memory Capacity
    • Four 240-pin DIMM sockets
    • Supports up to 8 GB DDR2 800/667/533 MHz memory
    • Single or Dual (recommended) channel memory
    Memory Type
    • DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1GB, 2GB
    Memory Voltage
    • 1.8V only
     
    On-Board Devices
    SATA
    • nVidia MCP55 Pro SATA2 3.0Gbps Controller
    • 6 SATA Ports
    • nVidia RAID 2.0
    • SATA RAID 0, 1, 0+1, 5, JBOD Support
    IDE
    • Supports UDMA Mode 5
    • Supports PIO Mode 4
    • Supports ATA/100/133
    IPMI
    Network Controllers
    • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    VGA
    • ATI ES1000 Graphics Controller
      16MB Graphics & VGA port
    Super I/O
    • Winbond 83627HF
     
    Input / Output
    SATA
    • Up to six SATA2 devices
    IDE
    • Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
    • Supports UDMA Mode 5
    • Supports ATA133/100
    Floppy
    • 1 Floppy port 1.44 MB
    LAN
    • 2 RJ45 LAN ports
    USB
    • 2 USB Rear Ports
    • 4 USB Internal Headers
    • 6 Total USB 2.0 Compliant, 1.1 Compatible
    VGA
    • 1 VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • 1 Fast UART 16550 serial ports
    • 1 Header
    Parallel Port
    • 1 ECP / EPP parallel port
    Expansion Slots
    PCI-Express
    • 1 x16 PCI-e slot
      (nVidia SLI Technology Supported)
    • 1 x8 PCI-e using x16 slot
    • 1 x4 PCI-e using x8 slot
    PCI
    • 3 PCI 32-bit, 33MHz slots
     
    System BIOS
    BIOS Type
    • 4Mb Flash EEPROM with AMI® BIOS
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3
    • PCI 2.2
    • ACPI 2.0
    • BIOS Rescue Hot Keys
    • SMBIOS 2.3
    • USB Keyboard support
    • Hardware BIOS Virus Protection
     
    Management
    Software
    • Optional IPMI (Intelligent Platform Management Interface) 2.0
    • Super Doctor III
    Power Configurations
    • ACPI Power Management
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • Main Switch Override Mechanism
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
     
    PC Health Monitoring
    CPU
    • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
    • Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
    • CPU switching voltage regulator
    FAN
    • Total up to five 3-pin fan headers
    • 5 Fan Status Tachometer monitoring
    • Status Monitor for Speed Control
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip support
    • I2C temperature sensing logic
    LED
    • CPU / Overheat LED
    • Suspend-state indicator LED
    • +5V Standby Alert LED
    Other Features
    • Chassis Intrusion Header
    • Chassis Intrusion Detection
    • Chipkill Support
     
    Operating Environment / Compliance
    RoHS
    RoHS 6/6
    Environmental Spec.
    • Operating Temperature: 10?to 35?C (50?to 95?F)
    • Non-operating Temperature: -40?to 70?C (-40?to 158?F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)
    Price with selected options : 
    $269.99

    Search Contact Us Site Terms of Use Terms and Conditions of Sale Privacy Policy Return Policy

    Copyright © 1994-2011 ONLY, Inc. dba Aaronix. All rights reserved.
    All prices, specifications, availability, and terms of offers are subject to change without notice.
    Images are for illustration purposes only and may not represent actual products. Not all accessories pictured on 1u server
    are included. ONLY, Inc. cannot be responsible for errors in typography or photography.
    Supermicro and other brand names, trademarks and logos are property of their respective owners.